|
|
ACL Drayton Lifestyle LP711
*Automatic summer/winter timechange
*Memory saver - programme and clock never need resetting in the event of
loss of power
*Easy to read, backlit screen
*New contemporary design
*Pre-set clock
*On/once/timed/off switching options
*3 timing periods per day
*Programme advance buttons
*Dimensions: 93x148x31mm HxWxD
*Part L Compliant (Part J in Scotland)
*Proven reliability
Same backplate and wiring as:
Lifestyle LP111
Drayton SM1, Tempus 1 (Tempus One), Tempus 2 (Tempus Two)
British Gas UT1, UT2, EMT2
Replaces (same backplate but requires a link
between two terminals): LS111, LS711
|
|
|
Switchmaster SM300
Pictured top left
* 24 hour programme
* CONSTANT/TIMED/OFF switching options
* Colour coded tappets (once or twice switching)
* Double insulated
* SM300: suitable for combi boilers - volt-free contacts
|
|
Danfoss
Randall 103
* 103 - Elecro mechanical 24 hour
* 103E5 5/2 day digital
* 103E7 7 day digital
A range of general-purpose timeswitches, which provide a single
output circuit. The range includes a simple 24-hour electro-mechanical
model, plus two electronic models, which offer 5/2 day or 24 hour and
7-day or 5/2 day operation.
All three units fit the GP wallplate and have an identical wiring
configuration, allowing systems to be upgraded without the need for
rewiring.
The electro-mechanical 103 has a Timed, Off, Constant switch, and a
thumbwheel, which allows early selection of future switching operations.
All models show clearly the current state of the output.
The electronic units have extra programmes and overrides, and
incorporate a battery to provide back up of time and programme.
|
|
| Danfoss Randall TS715 Si
The TS715 single channel electronic timeswitch provides voltage free output contacts making it an ideal solution for use with both line voltage and low voltage control circuits.
It is an ideal solution for combi-boilers, for systems having a common Heating and Hot Water zone, and for the control of additional heating zones.
The TS715 can be configured by the installer at time of installation to provide 7 day, 24 hour, or 5 day/2 day operation and either 2 ON/OFF's or 3 ON/OFF's per day, allowing the timeswitch to be tailored to match the specific requirement of the consumer.
Additional features such as convenient user overrides, built-in ready-to-use programmes, a day programme copy facility as well as a stylish, compact design and easy to read display make the TS715 the simple answer to all heating and hot water requirements
The updated TS715Si model provides:
* Service interval timer
* Factory set clock
* Automatic BST / GMT time changes
* Holiday function
* Backlit display
Replaces (use existing backplate & wiring):
TS15, TS75
|
|
| Honeywell ST9100
* ST9100A - 24 hour
* ST9100C - 7 day
The ST9100C is a 7 Day, single channel timeswitch that gives great
flexibility offering up to three on periods per day. Additionally each
day may be programmed differently. It is ideal for combi installations
when the user has different heating needs from day to day, or as a zone
control on a larger system.
The ST9100C has the new groundbreaking Lone of Text (LoT) display
that gives clear plain english Instructions whenever any button or
slider is used. This means installers, customers and users can operate
all of the controls reliably, without nneding to find an instruction
manual.
* Large backlit display
* Factory set clock and date
* Automatic Summer/Winter 1 hour time change
* Up to 3 On/Off periods per day
* Temporary or permanent override facilities
* Extra hour facility for up to 3 hours of boost or advance
* Choice of 3 different built in programmes
* Programme indicator lights
Replaces (same backplate and wiring):
Honeywell ST6100A, ST6100C
|
|
| Horstmann CentaurPlus
* C11 - 24 hour
* C17 - 7 day
* Inexpensive and easy to install
* Simple to use
* 3 Amp rated
* Three ON and three OFF periods each day
* Boost and advance
* Mains powered with battery back-up
* Programme options: On 24hrs, OFF, All Day or Auto
Replaces (same backplate and wiring):
Newlec NLC11, NLC17.
|
|
| Horstmann Channel.Plus
H17XL
CAN DIRECTLY REPLACE EARLIER H17 / H17XL
* Suitable for combination boilers
* 5 Year manufacturers warranty
* Part L Compliant 3 Amp rated
* 7 day programming
* Large, easy to follow LCD displays, give clear programme information
* Backlit display (on button press)
* Up to 3 ON/OFF periods in each 24 hour operation
* Different settings for each day of the week
* One touch holiday setting, suspends programme for up to 30 days
* 1 or 2 hour boost and advance
* Mains powered with battery back up
* 3 Amp changeover contacts
* Voltage free
Replaces (same backplate and wiring):
Horstmann H425 Coronet (switching must not exceed 3 amps), H517, H11
Newlec NL425C (switching must not exceed 3 amps).
|
|
| Horstmann H425 Coronet
A single circuit timeswitch for straightforward, accurate time
control. The 425 Coronet is particularly suitable for combi-boiler
systems, warm air systems and extra zone control. Four programmes offer
permanently ON or OFF, On all day or ON/OFF twice a day. An advance
switch allows temporary override without altering settings.
Replaces (same backplate and wiring):
Newlec NL425C
|
|
| Potterton EP5002 *
Digital Clock Display
* 7 Day Programming
* LED Curcuit Indicator
* Built In Programme
* Clock Maintained During Power Failure
* Over-Rides
Replaces (same backplate and wiring):
EP4000, EP4001, EP4002, EP5000, EP5001
|
|
| Siemens RWB27
The RWB27 offers customers unique menu programming allowing settings
to be made in a quick, easy and efficient way.
The devices offer the following features
* Unique menu driven programming
* Easy to read, larger than average backlit display
* Simple operation
* Up to 3 hour boost facility
* 2/3 on/offs
* Holiday programming
* Universal programming - daily, weekend/weekday, 7 day
* Programmable away from its backplate
* Battery back-up
Replaces (same backplate and wiring):
Landis & Gyr (Landis & Staefa)
All 1-channel RWB programmers*
All 1-channel Microgyr programmers*
Boss Therm RT7, RT24, BUT, RTF7
British Gas EMT1
Wickes RWB7.cw, RWB152.cw
*RWB3 / Microgyr 3 requires a link from L to 3 on backplate
|
|
|
Lockable Timeswitch Guard
* Holes in frame for air-flow
* Lockable
* Comes with 2 keys
|
|
|